First ensure that the damaged asphalt ramp repair area is clean and dry. Sweep or blow out cracks completely so there is no loose debris. When using FloMix asphalt ramp repair product, carefully pour contents of bottle “a” into the provided 5-gallon bucket then add special coated sand. (The sand proportion must higher than a normal FloMix mixture for a ramp repair to avoid sagging or running of material). Next, shake thoroughly and pour bottle “b” into sand mixture. Mix “a”, “b” and coated sand with a paddle-mixer, using a drill.  

The mixture must be as dry as possible. When FloMix is mixed, pour FloMix onto damaged asphalt ramp and use a trowel or lute to smooth the material into cracks. When the damaged area becomes smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your asphalt ramp can be ready for use in as little as an hour.

Smaller or hairline cracks in your asphalt ramp can be filled simply using Concrete Welder, available in a cartridge format. Once the crack is clean and free of moisture, open cartridge and squeeze Concrete Welder directly into the crack. Use a scraper or straight-edge to smooth the material out. Wipe up any excess material and allow to dry for 30 minutes. Now the crack is filled and your asphalt ramp repair area is ready for use. With the cracks in your asphalt floor filled and smooth, your ramp will look better and last longer.