| Q&A Home | Ask a Question | Recently Asked | FAQ'S | About Ben | Search Questions |
Recently Asked Questions
|
Q: I didn't use all the product in the bucket, can I use the remaining material later? A: No - all material must be used at one repair site. Material will set up in the bucket after 20-30 minutes. |
Posted By Admin Dec 24th, 2009 06:02:18 AM |
|
Q: Are FloMix repairs waterproof or chemically-resistant? A: FloMix seals, waterproofs and fuel-proofs asphalt. It is unaffected by dilute acids and bases, gasoline, diesel, aviation fuel, antifreeze, or lubricating oils and is insoluble in most solvents and chemicals. |
Posted By Admin Dec 24th, 2009 06:01:59 AM |
|
Q: How deep a hole can I fill? A: FloMix and FlexSet has been used on repairs as deep as 12" with appropriate preplaced aggregate in lifts though at that depth they are not always cost effective. |
Posted By Admin Dec 24th, 2009 06:01:39 AM |
|
Q: Are FloMix repairs slippery? A: The sand topping placed over FloMix creates a high-traction surface with a high coefficient of friction whether wet or dry. |
Posted By Admin Dec 24th, 2009 06:01:17 AM |
|
Q: Does FloMix stop water erosion of asphalt? A: Asphalt deteriorates quickly with repetitive water runoff found at car washes, outside restaurant kitchens, and with landscape irrigation. Water damage to asphalt stops when asphalt is resurfaced with FloMix. |
Posted By Admin Dec 24th, 2009 06:01:02 AM |
|
Q: Can FloMix be used in large areas subjected to chemical spills? A: Resurfacing asphalt with FloMix protects asphalt from cooking oil, oil dripping from cars, fuel, chemical, and toxic-waste spillage. Fuel storage & toxic waste sites, secondary containment, service stations, fast food restaurants, airport runways & aprons, parking lots and parking structures are typical asphalt installations that benefit from resurfacing with FloMix. |
Posted By Admin Dec 24th, 2009 06:00:40 AM |
|
Q: Are FloMix repairs affected by hot asphalt overlays? A: FloMix repairs are NOT affected by hot asphalt overlays. There is no softening and no melting. Asphalt overlays, chip and slurry seals and micro-paving bond to FloMix repairs. |
Posted By Admin Dec 24th, 2009 06:00:25 AM |
| Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | |
