| Q&A Home | Ask a Question | Recently Asked | FAQ'S | About Ben | Search Questions |
Recently Asked Questions
|
Q: Can you recommend a low VOC product with fast cure time for filling small cracks in sealed concrete flooring? High traffic area, strong enough to support occausional pallet jack traffic. Preferably clear to match clear seal coating. Indoor. Work needs to be done on weekend or holiday to minimize smells to occupants. A: Concrete Welder in cartridges would work. It has or will have a yellow tint as it ages, however. There are no fumes and it will set up in under an hour. |
Posted By Dain Jablonski Sep 14th, 2011 11:33:13 AM |
|
Q: I need a product that will fill holes and cracks with a strong bonding concrete around the lip (deck) of a pool. A: How close to the water are the cracks? Will you be able to dry them completely before you begin? If they are narrow and you can dry the cracks, Concrete Welder in Cartridges would be ideal for this fix. If the cracks are wider you may want to use FlexSet. |
Posted By Carrol Flood Delano Sep 12th, 2011 09:11:25 AM |
|
Q: Can this product be used for overhead concrete repair? I need something that can be mixed into a stiff mixture that can be packed into voids in overhead concrete deck A: This would not be an appropriate use of our products. It is not viscous enough for overhead use. |
Posted By Mark Holton Sep 9th, 2011 01:53:18 PM |
|
Q: I'm looking to surface repair a domestic porch the surface of which is spalling (max. 1/4 A: It is generally about 8 minutes depending on the air temperature and humidity. You can add catalyst for a faster setup. |
Posted By bob paulus Sep 7th, 2011 06:24:56 PM |
|
Q: What is the shelf life of the flexset concrete repair kit A: One year. |
Posted By Dominick Sep 7th, 2011 06:12:56 AM |
|
Q: Hi BenFirstly do you have a distributor in sydney AustraliaSecondly I use epoxies and modified cement products to fill cracks in concrete and tar products for tar Is your product as strong as the epoxies and is it similar to work with A: Sorry Sam, we do not yet have a distributor in Australia. Our products are stronger and easier to work with. |
Posted By sam Sep 5th, 2011 05:59:21 AM |
|
Q: Hi Ben, We have Flush Concrete curbing that encloses brick paver areas of neighborhood street. Concrete curb is cracking & spalling. Cracks average 1/4 A: You may need a combination of Concrete Welder in cartridges and FlexSet. We have a distributor in Ohio. His name is Joe Kindler from Advanced Material. You can reach him at 614-561-6440. Thanks. |
Posted By Pat Cain Sep 3rd, 2011 09:50:51 AM |
| Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | |
