Concrete Driveway Repair

Concrete Driveways are everywhere—homes, schools, businesses, industrial complexes and they are destined to break down. Polyurethane products are the simplest and fastest products available for concrete driveway repair. With these easy instructions your concrete driveway repair will be stronger and last longer than with traditional concrete driveway repair methods. Roklin’s concrete driveway repair product- FlexSet comes in a complete package ready to fix concrete driveways. With a few simple hand tools, repairs are simple. There is almost no preparation of cracked or damaged concrete. Simply sweep or blow out the damaged area, mix your materials and apply to concrete driveway repair area.

Concrete Driveway Repair

Polyurethane repairs can be done in most any weather. Provided the concrete driveway repair area can be dried before you begin, there is no need to worry about temperatures. FlexSet can be ordered with a catalyst for use in cold weather. With FlexSet, your concrete repair will set up in under an hour regardless of humidity or cold.

Tools needed: FlexSet, a push broom or blower, a drill, a trowel or lute

First ensure that the damaged area is clean and dry. Sweep or blow out cracks so there is no loose debris. Using Roklin’s FlexSet Concrete Driveway Repair Product, carefully pour contents of bottle “a” into provided 5-gallon bucket then add special sand. Next, shake thoroughly and pour bottle “b” into sand mixture.

Mix with an egg-beater style pail mixer, using a drill. When mixture is completely wet, pour FlexSet onto damaged area and use a trowel or lute to smooth material into cracks. When damage is sufficiently smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your concrete driveway can be ready for vehicles in about an hour.

FlexSet for Concrete Repair

FlexSet 5 Gallon Bucket
FlexSet 3 Gallon Bucket

FlexSet is supplied in three and five gallon kits with pre-measured amounts of chemical and aggregate in each container. Each 5-gallon kit will deliver 0.4 cubic feet which will cover approximately 50 square feet at a thickness of 1/8".

FlexSet Crack Repair components can be mixed in the bucket it comes in with a hand drill, or in our low cost Motor Mix Machine. The material has a 6-8 minute working time at 75ºF.

Concrete Repairs can be completed using FlexSet Concrete Repair in minutes with a few simple steps. There is no need for saw cutting or use of a primer. The resulting repair can be put back into service in as little as 30 minutes.

Listed below are some of the advantages that FlexSet Concrete Repair Product offers vs. conventional materials:

  • Minimal preparation required
  • No costly demolition necessary
  • Set-up in less than 10 minutes
  • Odorless & vapor-less
  • Exceptional bond to concrete
  • Unaffected by extreme heat or cold
  • Seals & waterproofs
  • Good chemical resistance to oils, fuels, and antifreeze
  • Outstanding durability
  • High-traction surface
and more info
Got a Project?
Tell us about it.

Just fill out a form and we’ll send you a free sample

Have a question about pavement repair?
Related Blog Posts
Wet Winter Effects on Concrete In the Wet Winter Effects on Asphalt article we detailed the combined effect of moisture and low temperatures...
This question really has two answers, depending on whether the driveway is concrete or asphalt. An asphalt driveway is going to need resealing and...
Q: I have a low spot just inside my garage doors. Can I just build it up a little and screte it level or would you suggest roughing it up with a...