Concrete Slab Repair

For a simple and long-lasting concrete slab repair, use polyurethane repair product FlexSet and Concrete Welder.

For small cracks, use Concrete Welder in cartridges and for more extensive concrete repairs, use FlexSet. Tools needed:

Concrete Welder Cartridge

Broom or Blower

Scraper or Straight Edge

FlexSet Kit

Drill

Egg-Beater Style Mixer

Trowel or Lute

First ensure that the damaged concrete slab repair area is clean and dry. Sweep or blow out cracks completely so there is no loose debris. When using FlexSet concrete slab repair product, carefully pour contents of bottle “a” into the provided 5-gallon bucket then add special coated sand. Next, shake thoroughly and pour bottle “b” into sand mixture. Mix “a”, “b” and coated sand with a paddle-mixer, using a drill. For cold weather or when a faster repair is needed, catalyst can be included.

When mixture is completely wet, pour FlexSet onto damaged concrete slab repair area and use a trowel or lute to smooth the material into cracks. When the concrete slab repair area becomes smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your concrete slab repair area can be ready for use in about an hour.

Smaller or hairline cracks in your concrete slab can be filled simply using Concrete Welder, available in a cartridge format. Once the crack is clean and free of moisture, open cartridge and squeeze Concrete Welder directly into the crack. Use a scraper or straight-edge to smooth the material out. Sprinkle surface with topping sand. Wipe up any excess material and allow to dry for 30 minutes. Now the crack is filled and your concrete slab is ready for use.

FlexSet for Concrete Repair

FlexSet 5 Gallon Bucket
FlexSet 3 Gallon Bucket

FlexSet is supplied in three and five gallon kits with pre-measured amounts of chemical and aggregate in each container. Each 5-gallon kit will deliver 0.4 cubic feet which will cover approximately 50 square feet at a thickness of 1/8".

FlexSet Crack Repair components can be mixed in the bucket it comes in with a hand drill, or in our low cost Motor Mix Machine. The material has a 6-8 minute working time at 75ºF.

Concrete Repairs can be completed using FlexSet Concrete Repair in minutes with a few simple steps. There is no need for saw cutting or use of a primer. The resulting repair can be put back into service in as little as 30 minutes.

Listed below are some of the advantages that FlexSet Concrete Repair Product offers vs. conventional materials:

  • Minimal preparation required
  • No costly demolition necessary
  • Set-up in less than 10 minutes
  • Odorless & vapor-less
  • Exceptional bond to concrete
  • Unaffected by extreme heat or cold
  • Seals & waterproofs
  • Good chemical resistance to oils, fuels, and antifreeze
  • Outstanding durability
  • High-traction surface
Applications
and more info
Got a Project?
Tell us about it.

Just fill out a form and we’ll send you a free sample

Have a question about pavement repair?
Related Blog Posts
Cracks to Craters, Roklin Has the Concrete Repair Solution Concrete cracks are like potato chips—it’s very hard to stop at just one. If...