All Products

PolyFlex DS (10 minute repair)

PolyFlex DS Case 21oz. Cartridges

PolyFlexDS repairs set up to a more flexible repair. PFDS is ideal where there is a lot of motion in the pavement. The polymer is a natural color and can be topped with gray or black sand to match your pavement. Make sure the crack is clean and free of moisture. If there is a lot of water, use a blow dryer or torch to make certain the crack is dry. Open cartridge and squeeze PFDS directly into the crack. Use a scraper or straight-edge to smooth the material out. Wipe up any excess material and allow to dry for 30 minutes. Now the crack is filled and ready for use. Roklin’s long-lasting solution is complete with almost no preparation and little drying time.

Applications
and more info
Got a Project?
Tell us about it.

Just fill out a form and we’ll send you a free sample

Have a question about pavement repair?
Can I Write off the Cost of My Parking Lot Repair? Roklin recommends FloMix for an asphalt repair of your parking lot and FlexSet for concrete...
Step-By-Step Pothole FloMix Asphalt Repair by Tamar on SEPTEMBER 21, 2015 in ASPHALT REPAIR FloMix asphalt repairs can be done with minimal...
        Even though it is only one day after Labor Day, it’s not too early to start preparing your pavement for...